I-Black Dacromet Coating Paint Top Coat JH-9321

Incazelo emfushane:

I gama le-brand:JUNHE

Inombolo Yemodeli:JH-9321

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Imigomo Yokukhokha Nokuthumela:
Inani elincane le-oda:100 Kilogram
Inani:Kuyaxoxiswa
Imininingwane yokupakisha:30kg/ umgqomo wepulasitiki
Isikhathi sokuthumela:Ezinsukwini eziyishumi ngemuva kokuthola inkokhelo kusengaphambili
Ikhono Lokuhlinzeka:Amathani ama-2 ngosuku

Umbala:Mnyama
PH:8.0-9.0
I-Viscosity:≥50s
Ubukhulu Befilimu Eyomile:10-20 (micron)
Ukuqina:≥1
Ukunamathela(degree):≤1

Incazelo

1) Isithako esiyinhloko i-silika ye-inorganic base-water, exutshwe nomsizi wokuvikela ukugqwala.
2) Izindleko zomkhiqizo ziphansi.
3) Isendlalelo sokumboza sibushelelezi, i-asidi ebuthakathaka futhi imelana ne-alkali.

Idatha Yezobuchwepheshe:

Cha.	Into	Idatha
1	Ukubukeka	Okumnyama, kuhle futhi kubushelelezi
2	I-Viscosity	≥50s
3	PH	8.0-9.0
4	Ubukhulu befilimu eyomile	10-20 (micron)
5	Ukuqina	≥1
6	Ukunamathela(degree)	≤1
7	Goba	1(mm)
8	ukumelana nokushisa nomswakama	240 (h)

Imiyalelo nokunaka:
1. I-Dip coating, i-spray coating njll;
2. Kufanele inyakaziswe ngokugcwele ukuze isetshenziswe;amanzi distilled noma amanzi deionized angasetshenziswa ukulungisa viscosity;Ukusebenza kwe-viscosity: 30-60s.
3. Lapho umswakama wemvelo ungaphezu kuka-85%, ungangeza utshwala obuthile bezimboni ukuze ulungise i-viscosity;
4. Isimo sokuphulukisa: 80℃/10min+140℃/30min;
5. Umshini wokuhlanza: amanzi agelezayo angasetshenziswa;
6. Gwema izinto ze-asidi, noma ukufakwa kwe-polymerization kanye nokuwohloka kuzokwenzeka;
7. Lo mkhiqizo ungasetshenziswa wodwa, indawo ehlanganisiwe icela uwoyela, ayinalo uthuli futhi yomile, kungcono ukwenza ukwelashwa kwangaphambili kokukhipha amafutha, ukwehlisa, kanye ne-phosphating.

Indlela yokucubungula:
I-base-coat+ 1 Ijazi eliphezulu
B 2 base-coat+ 1 Ijazi eliphezulu (ukuvikela ukugqwala okukhulu)
I-Professional Electroplated Zinc Coating, Black Dacromet Plating Alkali Resistant

Ipharamitha yenqubo:
I-Dip Coating Temperature RT
I-Viscosity esebenzayo 45-60 S
I-Centrifuge 210~270 RPM/min 10s X izikhathi ezingu-4-8
(Idivayisi ye-Centrifuge ayikwazi ukuxubaniswa ne-spin dyrer)
I-Spray Coating Temperature RT
I-Viscosity esebenzayo 30~40 S
Ukwelapha: 80℃ 10min + 140℃ 20—30min
Ukuvikelwa kokugqwala kokugeleza kwenqubo ye-b
Ukumelana nokugqwala: ≥1500h (NSS)
Ukumelana namanzi olwandle: 25℃≥1500h

Idatha Yezobuchwepheshe

Cha.	Into	Idatha
1	Ukubukeka	Okumnyama, kuhle futhi kubushelelezi
2	I-Viscosity	≥50s
3	PH	8.0-9.0
4	Ubukhulu befilimu eyomile	10-20 (micron)
5	Ukuqina	≥1
6	Ukunamathela(degree)	≤1
7	Goba	1(mm)
8	ukumelana nokushisa nomswakama	240 (h)