Inani elincane le-oda:100 Kilogram
Imininingwane yokupakisha:
Iphakethe A: 16kg / Metal Barel
Iphakethe B:24KG Plastic Barel
Iphakethe C:Kusekelwe enanini le-ejenti engu-B
Isikhathi sokuthumela:Ezinsukwini eziyishumi ngemuva kokuthola inkokhelo kusengaphambili
Imigomo Yokukhokha:L/C, T/T
Ikhono Lokuhlinzeka:Amathani ama-2 ngosuku
Umbala:Isiliva
Indlela Yokumboza:Dip-spin & Spraying
PH(20℃):5.0-8.0
I-Gravity ethize:1.30-1.40 (spray Coating)
I-Viscosity:Ngokusho kwe-Operating Demand.
Izinga Lokushisa Lokusebenza:22±2℃
Inqubo yokumboza
1.Mix Isilinganiso
Iphakethe A: Iphakethe B: Iphakethe C=1:1: X(ngokuvumelana nesidingo esihlukile se-viscosity)
2.Ngaphambi Kwengxube, Gcina i-A&B enesisindo kubhavu wamanzi ku-20-25℃, bese ugoqa u-A ukuze wenze udaka lwensimbi luhlakazeke ngokufanayo nge-frequency mixer, ngemva kokuthi u-A ehlakazwe ngokulinganayo ngokugcwele, bese wengeza u-B.
3. Hlanganisa u-A, engeza u-B eduze kodonga lomgqomo A kancane kancane, engeza u-B ngamaqoqo angu-2-3.
4.Sheshisa ukulinganisa ngemva kokwengezwa kuka-B, qiniseka ukuthi upende onamathelayo uxubene ngokugcwele, bese ufaka u-C. C kufanele ube yimpuphu uma kukhona isigaxa.(Izinga lokushisa lomphongolo akufanele libe ngaphansi kuka-30℃, ngaphandle kwalokho u-C ngeke uhlakazwe ngokwanele. ) Bese ugoqa amahora angu-12 kancane futhi ngokuqhubekayo.
5.I-coating kufanele ihlungwe ngesikrini sensimbi engagqwali engama-80 ngaphambi kokuthela emgqonyeni wokucwilisa.
6.Idivayisi yokulawula izinga lokushisa kufanele ifakwe umgqomo wokucwilisa ukuze kugcinwe izinga lokushisa lokumboza liku-20±2℃.(Uma izinga lokushisa liphezulu kakhulu, upende unesibopho sokuwohloka, futhi i-viscosity izokwenziwa.) I-coating kufanele inyakaze. isiyingi ukugcina ihlakazekile ngokulinganayo.
7.Hlola amandla adonsela phansi aqondile,PH,Izinga lokushisa,I-Viscosity yokumboza njalo ngamahora angu-8 uma isebenza ngokuqhubekayo.
Hlanganisa umdwebo
Ukunakwa
Amanye amakhemikhali anjenganoma iziphi izinhlobo ze-asidi, usawoti we-alkali awukwazi ukuxutshwa enamathela, ngoba lawa angenza i-Zn & Al plate isebenze ukuze iguge.
Gwema imisebe yelanga nemisebe ye-ultraviolet isikhathi eside uma isebenza, ngaphandle kwalokho izosheshisa ukuguga noma ukwenziwa kwe-polymerization kokunamathela.
Kubaluleke kakhulu ukulawula izinga lokushisa lokugqoka.Uma izinga lokushisa lokugqoka lishintsha lapho usebenza, lizokwenza i-viscosity, bese i-effect quatity yokugqoka ku-workpiece.Ngakho-ke ubudlelwano phakathi kwezinga lokushisa, i-viscosity kanye nenqubo yokuphotha kufanele ilawulwe kahle lapho unamathela.
I-viscosity izohluka uma indlela yokugqoka ihlukile.Khetha idatha ephansi uma i-spray coating, bese ukhetha idatha ephezulu uma i-dip spin coating.
Idatha Yezobuchwepheshe
| Cha. | Into | Idatha |
| 1 | PH | 6-7.5 |
| 2 | Amandla adonsela phansi athile (20℃) | 1.35±0.1 (i-spray coating) |
| 3 | I-Viscosity | 100-200s 20°C ZAHN #2 |
| 4 | Izinga lokushisa lokusebenza | 20±2℃ |
